Skip to content Skip to main navigation Skip to footer

Smart Fill

Last Updated: 2023/01/09

 

  • The Smart Fill function only supports engraving and cutting the same patterns or designs on materials of the same size and thickness.
  • Black materials are not supported.
  • Additionally, it should be noted that the material needs to be placed directly on the laser beds, or on a completely black material.
  • Please note that the tray may reflect the light from the light strip, which may affect this function. You can place a non-reflective, completely black material on the tray.

动画4.gif

Was This Article Helpful?

0
Related Articles