Skip to content Skip to main navigation Skip to footer

Tips for using LightBurn with WeCreat Lasers

Instead of controlling the Z-axis movement through LightBurn, here are some useful tips for you:

 

Step1. Click on the Device Settings>Enable Z axis and Optimize Z moves

Step 2. Set the Z offset value for the layer

  • For Vision models, click on the layer and set the Z offset to 100mm. 

  • For Vista model, set the Z-offset to 20mm.

Step 3. Input the thickness of the material, for example, 3mm>Play with parameters settings>click on start, the laser will automatically lower to the optimal height and start the process. 

 

Related posts: How to build the direct connection between Lightburn and WeCreat lasers?

 

Was This Article Helpful?

0
Related Articles